Home         Center of Excellence          About Us          Where to Buy          FAQ         Contact     
 www.hellausa.com     

>
Auxiliary Lighting
>
Work Lamps
>
Signal Lamps

  DuraLED® M

  DuraLED® MISP

  DuraLED® SAE

  DuraLED® M Marker

  NumiLED®

  NumiLED® PRO

  NaviLED®
>
Warning Beacons
>
Interior Lamps

DuraLed® M Combination Signal Lamps


Close

Optic appears clear until illuminated (off)
Tail lamp function displayed
Stop lamp function displayed
Turn function displayed
All functions displayed (on)

Close



Dimensions in millimeters

Larger View
Illuminations
Diagram
Mounting Instructions
Parts
Spare Parts

DuraLed® M Combi are "Fit and Forget" stop/tail/turn combination signal lamps, utilising the latest LED technology, and engineered specifically for ultra heavy-duty applications on mining equipment and service vehicles.

DuraLed® M Combi lamps are extremely robust, fully sealed truly “fit and forget” products, tolerant to severe vibration levels and very compact in design. A high impact and shock resistant clear XYLEX® lens is permanently bonded to a rugged, UV damage-resistant composite base for increased mechanical strength and maximum durability. Hella engineered DuraLed® M Combi lamps to ensure a very long service life and no lighting loss due to internal dirt build-up; they are also very well suited to wet and corrosive environments and tolerate short-term immersion. (See technical section for more XYLEX® information.)

Unlike normal signal lamps, DuraLed® products are maintenance free and extremely power efficient, which greatly reduces both operating temperature and demand on the vehicle’s electrical system. Maximum service life and light output of the high intensity LEDs is ensured by using internal heat sinks. The integral Multivolt™ control module also protects the DuraLed® M against damage from overheating, reversed polarity and short circuits. (See technical section for more Multivolt™ information.)

Safe and reliable electrical connection is facilitated via a highly flexible double insulated cable sealed into the base, terminated as a short length with a DT connector or 2m cable with tinned wire ends. Other connector options can be supplied as special orders.

DuraLed® M Combi lamps are equipped with advanced, clear micro optic lenses to prevent the hazardous occurrence of “ghost” signals by internally reflected light from other sources.

The smooth ergonomic design and very low profile (under 35mm) allows DuraLed® units to be installed on almost any surface.

Parts
 
Part No. Description  
HM2379X DuraLed® M Combi Signal
HM2379D DuraLed® M Combi Signal DT Plug

Spare Parts and Options
Part No. Description  
9.HMDLM001  Cover Kit Yellow

Top


 

 

   
  Product Features

   

Explanation of Keys


  • Impact resistant smooth XYLEX® lens
  • Clear precision micro optics
  • Multivolt™ 8-28V DC
  • Low power < 10W
  • Fully sealed “fit and forget” design
  • 0,5kg mass
  • 200G shock impulse resistant
  • Overheat, reverse polarity and short circuit protection
  • Double insulated supply cable with DT plug or tinned wire
  • Tested over a -40ºC to +70ºC temperature range
  • High efficiency, long life LED light
  • IP6K7K
  • UL94 flame retardant rated external parts
  • ADR, ECE and SABS compliant
  • Spares interchangeable with Hella DuraLed® range
  • CE compliant